Browsed by
Category: Uncategorized

How To Repair An Electric Kettle

How To Repair An Electric Kettle

Your kettle is something which you use on a daily basis, and you’ll never quite appreciate how much you use it until it breaks down. We all enjoy a cup of tea or coffee, and it’s tough to get one without using your kettle. We’re going to be taking a look at how you can repair some of the standard parts of an electric kettle, so you’ll never be without hot drinks when you want them the most.

The Wiring

The wiring is one of the most common parts of an electric kettle which can go wrong. You should regularly check the plug for signs of damage and to make sure that the connections are still secure. The wiring for the kettle is contained within the ‘flex’, which is a term given to describe the electrical cord inside the kettle. If you see any signs of deterioration, such as the wearing away of the flex itself or signs of overheating and burn damage, you should replace the flex immediately.

The Element

The element is the part of the kettle that works and heats up the water. This can be changed by unscrewing the shroud and locating the fibre washer which is inside the element. You’ll need to remove both of these parts, which will allow you to grasp and then extract the item. You can buy kettle elements from some places, but you should always make sure you have the correct one. Once you have it, you’ll need to fit a rubber washer onto the new element; this will provide a seal between the element and the actual kettle and will ensure that the product can be used safely. Make sure the pot is then cleaned thoroughly, and everything is secure before you use it carefully.

The Spout

The spout of your kettle is one of the hardest things to repair, in the simple sense that you can not. This is because the chromium plating and aluminium that you would usually find on a spout cannot support a permanent seal which most adhesives would provide, and you also can not find an adhesive which would be able to withstand the boiling temperature of the water as it leaves the kettle. If this a problem that you are experiencing, there are very few options left but to replace the body of the kettle or instead replace the entire pot.

Overall, these are just a few of the ways that you can repair some of the most common faults that you’ll find on the kettle. The kettle is a valuable part of the home which a lot of people use heavily to get hot drinks across the day. Therefore, you’ll want it fixed as soon as possible to ensure as little as disruption to your day as possible. Being able to fix it yourself is something which is a useful skill to have, as you’ll be saving yourself time and money by doing a self-repair. Not up for that, then call in the experts at appliancerepair-losangelesca.com.

Our metal used for UK rain guttering

Our metal used for UK rain guttering

New contract supplying aluminium

What can we say; we are all ecstatic to be able to announce that we’ve recently been awarded a contract for supplying all the aluminium used for a UK rain guttering company based in Surrey England.
Our contract is to that of one of the major suppliers of bespoke rain guttering in the UK. They manufacturer, design and install the whole system and we are glad to be supplying such a brilliant company. They are based in Surrey but serve the whole of the United Kingdom. Having been involved in major renovations throughout the UK and plenty of bespoke builds to private homes, blocks of flats, warehouse developments, the list continues.
Our aluminium is used to produced a variety of design of aluminium guttering from seamless aluminium guttering, box guttering, ogee guttering and extruded aluminium guttering. They also have the capability of finishing the aluminium guttering in a variety of colours and effects.
Aluminium is an ideal metal to use for guttering due to some unique properties that it possesses. Aluminium is particularly useful for rain and snow conditions as it doesn’t corrode. The aluminium simply oxidizes and forms an additional layer of protection the help prevent any deterioration. It truly is the ideal metal to use when it comes to guttering. Other properties also make it very useful and that is due to it being very light – puts less stress on brackets and joints to hold the guttering. It also doesn’t require any maintenance which is a huge bonus for something that is high up on a building or house.
We envisage our relationship with http://www.aluminiumgutteringcompany.co.uk to last a very significant amount of time due to the superior quality of our aluminium and the likelihood that it will continue to be used for many decades into the future.

Condenser Tumble Dryer or a Vented Tumble Dryer and Keeping them in Top Nick

Condenser Tumble Dryer or a Vented Tumble Dryer and Keeping them in Top Nick

Here in the UK, we unfortunately do not have the freedom to dry our clothes outdoors due to our temperamental weather system.

Tumble dryers are also ideal for homes or flats whereby it is difficult to vent a dryer from inside to outside. That is a condenser tumble dryer as it provides a totally versatile solution to your clothes drying requirements. Below you will find information that explains how your condenser dryer works and also highlights common questions and answers about them.

Knowing how your brand new condenser tumble dryer works will help in ordered to keep it in top working order so that is will last years to come. Here are a few handy tips to ensure that it works well.

How does a condenser tumble dryer work?

The condenser dryer reduces humidity by the use of two separate fair flows. The air is re-circulated in the machine and is heated. This hot air then passes through the damp clothes, thus picking up moisture. The damp air now passes through a condenser in one direction whilst the room temperature air is pumped through the condenser in the opposite direction. Therefore causing the moisture in the damp air from the clothes to condense back into water that is pumped to water tank, drain or outside via a hose.

To find out more tips, visit the Phoenix Appliance Repair specialists at www.appliancerepairofphoenixaz.com.

Producing Steel

Producing Steel

Producing steel comes from the process of using iron ore and scrap metals. During the process of steelmaking, impurities are produced, but can be removed to produce varying grades of steel. Impurities are typically nitrogen, silicon, sulphur, phosphorus and excess carbon. Alloying elements are usually added to help produce these different grades of steel. The elements include nickel, vanadium, chromium and manganese. Phase 1 desktop study carried out by Adeptus.